澳门美高梅手机app下载

p roduct / Products

Phone: 0755-27620900

Email: sales@lengbagg.com

Home > Products > Stencil Cleaning Machine

SM-8150N Multifunctional Water-based Stencil PCB Cleaning Machine

使用水基清洗液体进行的清洗。 This water-based screen cleaning machine is mainly used for cleaning SMT screens, misprints, PCB / PCBA surface solder paste, and flux in the electronics industry . Water-based cleaning liquids are used for cleaning.


The machine consists of a cleaning system, a rinsing system, a drying system, and a filtration system. The machine uses electricity and compressed air as energy sources, and manually inserts the stencil into the
In the cleaning room, after setting the cleaning, rinsing, drying and other related parameters in the touch screen, press the start button, and the screen will be automatically cleaned, rinsed and
dry. When the set cleaning process ends, it will automatically stop running and reset to realize the next work flow. This machine is very convenient
Professionals clean the stencil, and the chief officer improves production efficiency and quality. It belongs to a new type of high-performance automatic cleaning equipment. Equipment uses water-based liquid cleaning agents
And DI water for rinsing without any hidden safety hazards and no harm to personnel.

  • Function description
  • Detailed specifications
  • Gallery
  • service support

  • ● Specially used in water-based cleaning solution to clean screen, misprints, PCB / PCBA and other processes.

    ● Double liquid tank, equipped with heating system, to realize the needs of cleaning, rinsing and hot air drying.

    ● Process flow: cleaning-chemical isolation-rinsing (open / closed loop)-drying.

    ● The advanced fully automatic touch screen operation software is prepared, the program file is saved, and the use is simplified.

    ● System counting function, which can automatically accumulate the number of cleaning stencils and the number of circulating filters.

    ● The liquid and pump pressure can be displayed through the panel pressure gauge, which can timely feedback the operating status of the equipment.
    ● Spray pressure is monitored by pressure sensor, and alarm will be given if the pressure range is set too.
    ● Resistivity monitoring rinsing liquid to ensure cleanliness. Resistivity can be set to meet different steel mesh process requirements.
    ● Liquid backflow directly, reduce liquid consumption

    ● The overall stainless steel body is durable and resistant to cleaning fluids such as acid and alkali.

    ● Rinse water can be discharged for a long time through ion filtering.

    ● High pressure fan + hot air drying, the drying effect is faster and more thorough.
    ● Lower running cost. Only 30-120ml of liquid is needed for each cleaning. After cleaning, compressed air recovery pipe and pump residual liquid are used to reduce the liquid consumption by 50%.




  • Applicable screen size: up to 740mm (L) × 740mm (W) × 40mm (H) Special dimensions need to be customized

    Cleaning liquid capacity: 42L * 2PCS (maximum)
    Optimum liquid usage: 35L * 2PCS
    Cleaning and rinsing method: left-right moving high-pressure liquid spray cleaning
    Drying method: high pressure hot air cutting optional super model)
    Cleaning time: 2-8 minutes
    Cleaning liquid isolation time: 40S
    Rinse time: 2-8 minutes
    Rinsing times: 1-99 times (can be set)
    Drying time: 2-5 minutes
    Cleaning liquid recovery filtration: 1μm (micro-filtration matter: red gum and pollutants)
    Rinse liquid discharge filter: 5μm (filtering micro-objects: red gum and pollutants)
    Liquid heating temperature: room temperature to 60 ° C noise: less than 50 decibels
    Resistivity tester range: 0 ~ 18MΩ
    DI water supply: 30 ~ 60L / min
    DI water pressure: ≤0.4Mpa
    DI water inlet and outlet connection pipe: 1 inch
    Air supply: 0.45Mpa ~ 0.7Mpa
    Water source pressure: 0.2-0.3Mpa
    Power supply: AC380V 50HZ

    Total power is about: 30KW

    Net weight of machine: 500Kg

    Exhaust port size: Φ124 (W) × 30mm (H)

    Machine size: 1300mm (L) × 1400mm (W) × 1850mm (H)

Contact Us

Address / Add: 1 / F, Building 13, Hongfa Industrial Park, 91 Tangtou Avenue, Shiyan Town, Baoan District, Shenzhen

Phone / Tel: 0755-27620900

Email: sales@lengbagg.com